Product Information:

• The toughest custom seat covers available-bar none!
• Non-hazardous to human beings!
• Stain resistant!
• Available in Black, Brown & Grey!
• Can be hand washed or dry cleaned!

A woven polyester fabric with two time PU coating Ballistic may not be the most comfortable material but it sure is the toughest one available. It can withstand an outstanding number of entries and exits and harsh usage even the riveted jeans would not damage this material. Protection Deals’ Ballistic car seat cover fabric has an inner water proof coating which takes care of its intrinsic stiffness.

The fabric is UV protected to ward off the harmful effects of the Sun rays. It also has fire retardant to ensure protection from fire. This eco-friendly constructed fabric is suitable to human contact and safe for kids. It is resistant to stretching, flexing and punching. Get customized your car seat cover in Black, Brown or Grey color.

Feature Guide:

• Two time PU coating
• Inner water proof coating
• Non –skid material
• Breathability
• Good Heat Insulation
• Wide temperature tolerance
• Protection from dust
• Water repellent
• High Tensile Strength
• No seam slippage
• Durability
• Color fastness to perspiration
• Good fire resistance
• UV resistant
• Resistant to chemical attack
• Mildew & rot resistant
• High resistance to puncture, tearing & flexing
• Scratch resistant
• Abrasion resistant
• Eco-friendly - recyclable
• Suitable for human contact
• No emission of volatiles
• No obnoxious odors
• No effect of air pollution
• Available in Black, Brown & Grey
• Easy to wash
• Packs small & light

Installation Guide:

Steps to follow:
A) Remove Headrest
B) Install Backrest
C) Install Bottom Cover
D) Installation on solid bench seats
E ) Console cover installation

REMOVAL OF HEADREST
A headrest can be removed in any of the following ways:

1. Depress both side tabs and start lifting the headrest. If required take help from another person.
    
2. Headrest with PIN HOLES on top
   
   1. Insert a paperclip end into the hole on the side of the head rest top.
   2. While pressing the paper clip, lift headrest.
3. SLOT   & TAB
   
   1. Depress the tab and press into the slot at the same time, and lift the headrest. This may require more than one person.
4. PINHOLE & TAB
   
   1. Insert a paperclip end into the hole on the side of the headrest base.
   2. While pressing the paperclip, press the tab on the other base.
   3. While pressing both lift the headrest.
      
      This may require more than one person.
      NOTE: Place the headrest cover and put the headrest aside to be attached after covering the backrest.

BACKREST INSTALLATION

1. 
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass the cover through the backrest.
   3. Attach velcro to the flap which is passed through the opening between seat back & seat bottom.
   4. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
2. for BUCKET SEAT with Non-Removable Headrest
   
   1. Fold the seatback forward to gain better access while passing the flap through.
   2. Pass the cover through the backrest.
   3. Attach velcro to the flap which is passed through the opening between seat back & seat bottom.
   4. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
3. for BUCKET SEAT with Integrated Seat Belts
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
4. for High Back BUCKET SEAT
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
5. for 60/40 SPLIT BENCH
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
      
      NOTE : Attach the headrest over the backrest after placement of Backrest cover.

INSTALLATION OF SEAT BOTTOM COVER

1. 
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Position cover over seat bottom.
   3. Pass flap through.
   4. Attach buckles & hooks.
   5. Tuck excess material behind plastic trim pieces for an extra custom look.
       
2. for SOLID BENCH style
   Follow instructions mentioned below if you have a solid bench Seat ( three people can sit on the seat) ( with or without headrests).
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. If the seat has the folding armrest, place it in “up“ position.
   3. Place seat cover over seat bottom.
   4. Tuck flap through the opening between seatback & seat bottom.
   5. Affix straps.
      NOTE : Some seat bases are not covered.

CONSOLE COVER INSTALLATION

Steps to follow:

• Open console.
• Cover console top.
• Then cover console bottom.
• Pass console bottom flap through opening.
• Affix Velcro.

NOTE: Refer to Special Instructions & Finishing Touches for special needs and extra custom look.

SPECIAL INSTRUCTIONS – I

Seats with airbags, Lumbar supports and armrests require special instructions:

1. Seats with Integrated Seat Airbags must be covered only with seat covers designed with opening flaps. The flap inserts inside the cutout, and should be able to open freely in case of deployment. If your vehicle has seat mounted airbags, be certain that the seat covers have airbag cutouts or flaps.
   NOTE:  Do not cover seat airbags.
2. Some levers or controls may require a slit in the seat cover.

Cleaning Instruction:

Regularly clean your car seat cover for long life and optimum protection of your car interiors. Remove seat covers from the car seat for washing and follow the instructions given below.

MACHINE WASH
TYPE OF MACHINE - Use large automatic speed control washers without agitators.
TYPE OF DETERGENT – Always use eco- friendly non-caustic, non-toxic bio-degradable anionic laundry detergent.
TEMPERATURE – 20 TO 27 * C
WASH CYCLES –  Run 5 minutes of gentle wash cycle.
NUMBER OF CYCLES – 2 for rinsing, 1 cycle to half – dry
WASH PROCESS – steps to follow: 

1. Fill machine with cold or warm water upto the desired level and mix 2 cups of detergent as described above.
2. Soak for 5 minutes to help loosen the dirt
3. Wash the covers through 5 minutes of gentle cycles.
4. Rinse with two cycles of cold water.
5. Again rinse one cycle to half dry.
6. Flat dry in normal temperature.

This washing technique protects finishing treatments on the fabrics.

NOTE:

• Do not use agitator as it may tear-off or rip the product.
• Do not use automatic dryer.
• Do not use small domestic machines as the small space will not provide smooth movement.
• Do not use a fabric softener.

HAND WASH
If the covers are not so dirty, use hand washing instead of machine with detergent described above and cold water.

You can view the technical specification of Seat Diagrams

Click on following link to View or Download the Seat Diagram

View Seat Diagram

Download Seat Diagram PDF file