Product Information:

• Hero for all Stringent weather conditions     
• UV reflector top layer
• Best UV protector
• 300 x 300D polyester
• Two times PU coated at back
• Fleece like inside layer tender to car surface
• Highly water resistant
• High durability
• Easy breathability
• Abrasion resistance
• Protector from stringent weather conditions
• Resistant to sun fading
• Compact & easy to maintain

Silverguard Plus gives the same protection to your car as silverguard with an additional fleece like layer inside that further protects your car’s finish. Silverguard Plus also goes through several tests including a tensile strength test, a tearing test and an elongation test to ensure that Silverguard Plus is strong and durable 300 x 300 polyester.

Silverguard Plus comprises four layers – silver poly urethane coating on top, followed by two coats of highly water resistant poly urethane coating and finally soft polyester felt on the inside that rests on the vehicle. The silver coating deflects the harmful sun rays and the heavy duty polyester layers ensure performance and durability. The polyester felt inner layer protects the surface paint of the car. All these make Silverguard Plus the best coated material available in the market.  Silverguard Plus saves your car against extreme heat, abrasions, moderate rain and snow while allowing breathability

Feature Guide:

• Made out of strong 300 denier polyester
• All benefits of Silverguard Material
• Plus inner fleece-like lining
• Tender inner layer to pamper delicate paint finishes
• Silver colored UV inhibitor
• Highly breathable
• Resistant to Sun fading
• Shrink resistant
• Suitable for severe weather
• Highly abrasion resistant
• Sleek, sporty look
• Tested extensively for tensile strength
• Tested for tearing
• Tested for elongation
• Tested for water- vapor transmission
• Tested foe surface water repellency
• Tested for moisture vapor
• Tested for hydrostatic pressure
• Natural water resistant
• Wrinkle resistant
• Crisp & resilient
• Easy to fold & up keep
• Can be machine washed or dry cleaned
• Retains heat-set pleats and crease.
• Available in an exclusive silver color

Installation Guide:

BEFORE INSTALLATION

1. Read instructions carefully before starting the installation of the cover.
2. Follow the instructions as detailed in the guide.
3. Use cloth reinforcements or Mystic brand tape to support abrasion prone areas.
4. Be careful about any sharp objects on the car.

STARTING INSTALLATION

1. Place cover over the center of the car and start spreading.
2. First of all cover the mirror pockets and then apply the cover over the bumpers.
3. This makes installation easy particularly in windy conditions.
4. Pay special attention to any antenna or mirror pocket area while installing the car cover.
5. Take cover on to the front and rear bumpers one by one.
6. Use the front & rear elastic ends of the cover to securely fix on the vehicle.

REMOVAL OF COVER

1. For removing the cover, release both ends of the cover from under the bumpers.
2. Fold up both sides of the cover on to the top of the car.
3. Then start folding from front to the back.
4. Store the cover in storage bag.

NOTE: Never try to move or drive the vehicle with cover still on.
            Never store wet cover in the bag.

Cleaning Instruction:

CAN BE MACHINE WASHED & DRIED OR DRY-CLEANED.

When choosing to wash Silverguard Plus car covers in the machine, follow the instructions mentioned below:

1. Remove the cover from the car.
2. Fill cold water upto the desired level, use eco-friendly non-caustic, non-toxic, biodegradable anionic laundry detergent
3. Use gentle wash cycles for 5 minutes.
4. Use 2 cycles for rinsing.
5. Machine-dry at a low temperature.
6. Remove as soon as the tumbling cycle is complete.
7. Apply moderately warm iron for ironing.

NOTE:
Do not use a fabric softener.
Do not use small domestic machines.
Do not use agitator.
Do not use automatic dryer.
Do not store wet cover in the bag provided for storage.