Product Information:

• Moisture Transportation
• High Degree of Breathability
• Optimal Comfort
• Gentle on Skin
• Available in 5 bright colors

When you choose Sapcer Mesh Seat Covers you stay dry, you stay comfortable and you drive better. Spacer is a high -tech upholstery fabric with a three -dimensional look. Visually, it appears to be three separate fabrics that have been connected. A look achieved by a complex knitting process allowing all layers to be knitted at once which makes it incredibly strong.

Actually, Spacer Knits are double layered circular knits with a cushion of air "Spring Like" yarns between the two sides.  Although it looks like several fabrics bonded together, it is actually one fabric that can not be separated by layer. It is a skin friendly fabric which adapts itself to the body. A padding of 4 mm FMVSS foam and trico makes it more comfortable. You can get your Spacer Mesh car seat covers customized in any of the 5 bright colors available at Protection Deals.

Feature Guide:

• All weather protection
• Light weight
• Excellent soft touch
• Pleasant to skin
• Active breathing properties
• High tensile strength
• Transports & absorbs moisture
• Digitally printed colors
• Aging resistant
• Capable of sterilization
• Wash resistant
• Thermo regulating properties
• Pressure elastic
• Made of PES or PA monofilament yarns
• Extensive applications
• Soft on vehicle paint
• Good heat insulation
• Strength & durability
• Fire retardant
• Water resistant
• Mildew & rot resistant
• Pollution resistant
• Thick without being dense
• Available in 5 bright colors
• No emission of volatiles
• Eco –friendly, skin friendly
• No obnoxious odors
• Packs small & light
• Easy washing, quick drying
• Hand wash or Dry clean

Installation Guide:

Steps to follow:
A) Remove Headrest
B) Install Backrest
C) Install Bottom Cover
D) Installation on solid bench seats
E ) Console cover installation

REMOVAL OF HEADREST
A headrest can be removed in any of the following ways:

1. Depress both side tabs and start lifting the headrest. If required take help from another person.
    
2. Headrest with PIN HOLES on top
   
   1. Insert a paperclip end into the hole on the side of the head rest top.
   2. While pressing the paper clip, lift headrest.
3. SLOT   & TAB
   
   1. Depress the tab and press into the slot at the same time, and lift the headrest. This may require more than one person.
4. PINHOLE & TAB
   
   1. Insert a paperclip end into the hole on the side of the headrest base.
   2. While pressing the paperclip, press the tab on the other base.
   3. While pressing both lift the headrest.
      
      This may require more than one person.
      NOTE: Place the headrest cover and put the headrest aside to be attached after covering the backrest.

BACKREST INSTALLATION

1. 
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass the cover through the backrest.
   3. Attach velcro to the flap which is passed through the opening between seat back & seat bottom.
   4. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
2. for BUCKET SEAT with Non-Removable Headrest
   
   1. Fold the seatback forward to gain better access while passing the flap through.
   2. Pass the cover through the backrest.
   3. Attach velcro to the flap which is passed through the opening between seat back & seat bottom.
   4. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
3. for BUCKET SEAT with Integrated Seat Belts
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
4. for High Back BUCKET SEAT
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
5. for 60/40 SPLIT BENCH
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
      
      NOTE : Attach the headrest over the backrest after placement of Backrest cover.

INSTALLATION OF SEAT BOTTOM COVER

1. 
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Position cover over seat bottom.
   3. Pass flap through.
   4. Attach buckles & hooks.
   5. Tuck excess material behind plastic trim pieces for an extra custom look.
       
2. for SOLID BENCH style
   Follow instructions mentioned below if you have a solid bench Seat ( three people can sit on the seat) ( with or without headrests).
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. If the seat has the folding armrest, place it in “up“ position.
   3. Place seat cover over seat bottom.
   4. Tuck flap through the opening between seatback & seat bottom.
   5. Affix straps.
      NOTE : Some seat bases are not covered.

CONSOLE COVER INSTALLATION

Steps to follow:

• Open console.
• Cover console top.
• Then cover console bottom.
• Pass console bottom flap through opening.
• Affix Velcro.

NOTE: Refer to Special Instructions & Finishing Touches for special needs and extra custom look.

SPECIAL INSTRUCTIONS – I

Seats with airbags, Lumbar supports and armrests require special instructions:

1. Seats with Integrated Seat Airbags must be covered only with seat covers designed with opening flaps. The flap inserts inside the cutout, and should be able to open freely in case of deployment. If your vehicle has seat mounted airbags, be certain that the seat covers have airbag cutouts or flaps.
   NOTE:  Do not cover seat airbags.
2. Some levers or controls may require a slit in the seat cover.

Cleaning Instruction:

Spacer Mesh car seat covers can be Hand Washed, Machine Washed or Dry cleaned. Regularly clean your car seat cover for long life and optimum protection of your car interiors. Remove seat covers from the car seat for washing and follow the instructions given below.

MACHINE WASH

TYPE OF MACHINE - Use large automatic speed control washers without agitators.
TYPE OF DETERGENT – Always use eco- friendly non-caustic, non-toxic bio-degradable anionic laundry detergent.
TEMPERATURE – 20 TO 27 * C
WASH CYCLES –  Run 5 minutes of gentle wash cycles.
NUMBER OF CYCLES – 2 for rinsing, 1 cycle to half – dry
WASH PROCESS – steps to follow: 

1. Fill machine with cold or warm water upto the desired level and mix 2 cups of detergent as described above.
2. Soak for 5 minutes to help loosen the dirt
3. Wash the covers through 5 minutes of gentle cycle.
4. Rinse with two cycles of cold water.
5. Again rinse one cycle to half dry.
6. Flat dry in normal temperature.

This washing technique protects finishing treatments on the fabrics.

NOTE:

• Do not use agitator as it may tear-off or rip the product.
• Do not use automatic dryer.
• Do not use small domestic machines as the small space will not provide smooth movement.
• Do not use a fabric softener.

HAND WASH

If the covers are not so dirty, use hand washing instead of machine with detergent described above and cold water.

You can view the technical specification of Seat Diagrams

Click on following link to View or Download the Seat Diagram

View Seat Diagram

Download Seat Diagram PDF file